UV-03.1.A
UV flame detector
The UV-03.1.A flame detector with recessed pipe housing detects arcs and
fires with open flame. It responds to the UV-C radiation mainly contained in the flame borders, in the range from 185 to 235 nm, and is perfectly suited for open flames without smoke development.
The sensor does not respond to sunlight, light bulbs, fluorescent lights or
flying sparks. False tripping is possible, however, with UV radiating light sources. Included in this are, for example, halogen and mercury vapor lamps, lightning, arc during welding work and reflections of the above radiation sources. In addition, smoke, dust and water vapor, as well as contamination of the UV pane, absorb the ultraviolet radiation and therefore negatively effect the response behavior of the sensor.
UV-03.1.A – data and facts
| Operating voltage |
12…30VDC=
|
| Operating current two-wire technology |
< 50µA
|
| Spectral sensitivity |
185…260 nm
|
| Viewing angle without ventilation |
ca. 110°
|
| Control module temperature range |
-20…+60°C
|
| Temperature range Pipes |
-20…+70°C
|
| Dimensions | |
| Control module |
98 x 64 x 35 mm
|
| Tube housing |
55 x 25 x 25 mm
|
| Sensitivity | |
| (set to 2 cm gas flame from 3 mm tube, 30%prop.70%but.) |
ca. 200 ms/80cm
|
Options and special features
| – Potential-free relay contact, normally closed/normally open contacts, Photo-MOS-Relay UV-03.Rx – Recessed tube housing |
These products might be interesting for you
UV-
FALME DETECTOR
Ultraviolet flame detectors detect both open flame and arc fires and are particularly suitable for use in potentially explosive atmospheres.
IR-
FALME DETECTOR
The infrared flame detector detects open flames and fires of both organic and inorganic materials and is well suited to flame detection.
UV-
SPARK DETECTOR
The infrared spark detector detects sparks and flames in closed systems, such as absolutely dark system parts with very little extraneous light incidence.
IR/UV-COMBI-FLAME DETECTOR
The IR/UV combination flame detector detects fires with an open flame involving carbon. This is well suited for open flames without smoke development.
