IU-01
Infrarot-Ultraviolett-
IR / UV combination flame detector
The infrared-ultraviolet combination flame detector IU-01 detects fires with open flames involving carbon.
The IR part responds to the flickering of the flame and the spectral line of CO2,
the UV part responds to the ultraviolet components of the flame radiation (UV-C radiation in the range 185-235 nm) that are mainly contained in the edges of the flame. The alarm is only triggered when both the IR and UV parts have detected a fire.
The detector is well suited to open flames without smoke development.
It does not respond to sunlight, incandescent lamps (continuous/modulated), fluorescent tubes, flying sparks, electric arcs, hydrogen flames, calm flames without flickering and metal fires.
Smoke, dust and water vapor as well as dirt on the detector’s panes limit its use because they absorb radiation and impair the detector’s response.
IU-01 – data and facts
Operating voltage |
10…28 VDC
|
Operating current at 24V |
< 120 µA
|
Viewing angle (without / with ventilation) |
ca. 110° / 35°
|
Protection class of the housing |
IP65
|
Temperature range |
-20…+60° C
|
Dimensions (without / with ventilation) | 125 x 80 x 57 / 75 mm |
Weight (without / with ventilation) | 540 g / 600 g |
Alarm pulse (without latching) |
ca. 1 s
|
Sensitivity (set to 2cm gas flame from 3mm pipe, 30%Prop. 70%But.) line end resistance (standard) |
calibrated @
80cm <10s not active |
Response delay (adjustable)
Spectral sensitivity |
5 s, / 10 s
IR / UV part |
Options and special features
Particularly high immunity to false alarms from other radiation sources Optionally available with air purge connection IU-01.LU Optionally with two changeover relays for “fault” and “alarm” IU-01.R |
These products might be interesting for you
UV-
FALME DETECTOR
Ultraviolet flame detectors detect both open flame and arc fires and are particularly suitable for use in potentially explosive atmospheres.
IR-
FALME DETECTOR
The infrared flame detector detects open flames and fires of both organic and inorganic materials and is well suited to flame detection.
UV-
SPARK DETECTOR
The infrared spark detector detects sparks and flames in closed systems, such as absolutely dark system parts with very little extraneous light incidence.
IR/UV-COMBI-FLAME DETECTOR
The IR/UV combination flame detector detects fires with an open flame involving carbon. This is well suited for open flames without smoke development.