UE-01.S /SV-01.S
Monitoring unit
with voltage supply
The UE-01.S/SV-01.S monitoring unit is used for simple monitoring of machines and system parts. Its operating temperature range meets the requirements of temperature class T1/EN 50155. The circuit board is lacquered on both sides corresponding to EN 50155. The device has a monitored signaling circuit and a monitored trip release circuit for the extinguisher. Included in the equipment are potential-free changeover for alarm and error messages and an internal monitoring for the operating voltage. An error message occurs at Vb < 18 VDC. The monitoring unit is compatible in two-wire technology with all Brandtronik sensors and with a large number of third-party manufacturers.
The extinguishing output can be deactivated. This process is displayed via an LED on the front plate, exactly as for operation, sensor malfunction, extinguishing output malfunction, alarm and extinguishing. The reset button for resetting the device and sensor is also located here. All external components can be connected via pluggable spring clips. The external power supply SV-01.S has a wide input range to permit power supply over the range of 90-264 V~/24 VDC/ 230 mA. The housing can be mounted on a standard rail with no problem.
UE-01.S /SV-01.S – Data and Facts
Operating voltage |
18…30VDC
|
Operating current |
30mA
|
Line monitored | |
Short circuit range |
0…120Ω
|
Alarm range |
180…900Ω
|
Operating range |
1,5…7kΩ
|
Open circuit range |
> 10kΩ
|
Temperature range |
-25…+70°C
|
Dimensions | |
With plugs |
22,6x105x69,5 mm
|
Potential-free changeover contact | |
Malfunction |
30VDC / 0,5A
|
Alarm |
30VDC / 0,5A
|
Voltage supply SV-01.S | |
Input voltage |
90…264V~
|
Output voltage |
24VDC ±2%
|
Output current |
< 230mA
|
These products might be interesting for you
UV-
FALME DETECTOR
Ultraviolet flame detectors detect both open flame and arc fires and are particularly suitable for use in potentially explosive atmospheres.
IR-
FALME DETECTOR
The infrared flame detector detects open flames and fires of both organic and inorganic materials and is well suited to flame detection.
UV-
SPARK DETECTOR
The infrared spark detector detects sparks and flames in closed systems, such as absolutely dark system parts with very little extraneous light incidence.
IR/UV-COMBI-FLAME DETECTOR
The IR/UV combination flame detector detects fires with an open flame involving carbon. This is well suited for open flames without smoke development.