• BRANDTRONIK
  • We about us
  • Products
  • Imprint
  • Press
  • References
  • Contact
  • Map
  • Vacancies

Control Units | Combined Detectors | Ultraviolet Detectors | Infrared Detectors | Infrared Detectors with optical fibre | Accessories



Zertifikat

Security Essen
 
  

UV-01


UV-01.EX

UV-01 Ultraviolet Flame Detector  
  This UV Flame Detector is highly suitable for the detection of open flames and electric arcs.
It does not signal sparks, most sources of artificial light, daylight, direct solar irradiation.
Due to its round housing, this Detector is especially suitable for mounting on tubes.
  Key data:
2 designs with a 110° cover bracket (without ventilation) and 30° cover bracket (without ventilation).
Ingress protection IP65
Two-line Detector system
Operating voltage and current 12 to 24 VDC < 100 µA
Alarm resistor 560 Ω standard
Housing dimensions D 40mm, L 77mm (without ventilation)
Housing dimensions D 40mm, L 95mm (with ventilation)
UV-01 UV Flame Detector 15 to 30 VDC Price upon request.
UV-01.LU UV Flame Detector 15 to 30 VDC with ventilation Price upon request.
UV-01.EX UV Flame Detector ATEX 2G (for gas and vapour only) Price upon request.
In Ex housing, with cable 10 m
   

UV-02
UV-02 Ultraviolet Flame Detector  
 
This UV Flame Detector is ideally suited for detecting open flames and electric arcs.
It does not signal sparks, most sources of artificial light, daylight, direct solar irradiation.
This Detector is suitable for all two-line and four-line wiring systems and is equipped with potential-free contacts for faults and alarm.
DIP switches provide adjustable settings for Detector sensitivity to local needs.
  Key data:
110° cover bracket
Ingress protection IP65
Two-line Detector system – four-line Detector system
Operating voltage and current 24 VDC < 400 µA
Alarm resistor 560 Ω standard and 10 kΩ standard
Housing dimensions 125 x 80 x 58 mm
UV-02 UV Flame Detector, with alarm and fault relay, 24 VDC Price upon request.
UV-02.LU UV Flame Detector, with ventilation, 24 VDC Price upon request.
   

UV-03 without ventilation


UV-03.LU with ventilation

UV-03 Ultraviolet Flame Detector  
  This UV Flame Detector is highly suitable fort the detection of open flames and electric arcs.
It does not signal sparks, most sources of artificial light, daylight, direct solar irradiation.
DIP switches provide adjustable settings as to Detector sensitivity and time range.
  Key data:
Two-line Detector system – four-line Detector system
Ingress protection IP65
110° cover bracket (without ventilation) or 35° (with ventilation)
Two-line Detector system – four-line Detector system
Operating voltage and current 12 to 24 VDC < 100 µA
Alarm resistor 560 Ω standard
Housing dimensions 125 x 80 x 58 mm
UV-03 UV Flame Detector 12 / 24 VDC Price upon request.
UV-03.LU UV Flame Detector with ventilation 12 / 24 VDC Price upon request.
   
 
     
 

© 2002 - 2008 BRANDTRONIK GmbH

Copyright © 2008 BRANDTRONIK GmbH. All rights reserved.